Rubber gloves manufacturing process

Rubber gloves in the production of coagulation bath concentration measurement

Rubber gloves are widely used in health care, food processing and services, automotive and construction and chemical industries, can be made of natural rubber (emulsion) or synthetic rubber (nitrile rubber (NBR) and chloroprene rubber (CR)).

Natural rubber gloves use rubber technology manufacturing and become, in the process, into liquid latex ceramic or metal fingerprint, then dry.Then the model into the coagulation bath containing calcium nitrate or calcium carbonate solution.Using coagulant to enhance polymer flocculation and ensure the latex is evenly distributed on the surface model.

Mild after drying, the model into a composite latex emulsion in the impregnating tank, mature mature composite latex is a mixture of latex and various composite chemicals.Because of the concentration of the emulsion quality, durability, and final product specifications has crucial influence, so you need to accurate measurement and control.

Subsequent leaching process, the model into hot water to dissolve protein, water soluble residues and other chemicals in the preceding section.Appropriate leaching processing of gloves can improve the strength of the latex film, but it must supplement water in case of high dip bath solution concentration caused by extract.

Visa K - PATENTS^®Online refractometer can be installed in the different stages of rubber gloves production line, used for measuring the concentration of the bath solution.This refractometer can provide continuous measurement of total solids (TDS) concentration, conform to the specifications to ensure that the operating process and ensure the quality of the rubber gloves.

See the application instructions, learn about natural and synthetic rubber gloves production more detailed information.

Fill out the form, you can download the PDF format of the application.

returnAll chemicals, and similar products

The Image